Mahr Millimar C 1200 User Manual

36
Mahr GmbH • Millimar C1200
Measurement Display Setup System
Customer calibration
Enable
Probe calibration
Factory standard calibration
Customer calibration Reset
Ó
ü
q p
Measurement Display Setup System
Absolute mode
Customer calibration
Factory calibration
Factory settings
Keyboard-/ menu interlock
Info
Ó
ü
q p
ü
Measurement Display Setup System
Absolute mode
Customer calibration
Factory calibration
Factory settings
Keyboard-/ menu interlock
Info
Ó
ü
q p
ü
6.2 Customer calibration
6.2.1 Enabling customer calibration
– Press the ON / OFF key
=> Standard menu appears
– Press u to select the System
menu
– Press q to select the Customer
calibration submenu
– Press ü to conrm
– Press q to select the Enable
submenu
– Press ü to conrm or Ó to
cancel the selection
=> The ü symbol indicates the
currently active calibration
– Press the ON / OFF key to exit the
input menu.
If a customer-specic calibration is required, this can be completed in the
menus described in the following. The calibration can be completed with the
connected probe or alternatively with a factory standard (e.g. Mahr 1283 WN
Factory Calibration, Order no. 5312833).

Mahr Millimar C 1200 Specifications

General

Brand	Mahr
Model	Millimar C 1200
Category	Measuring Instruments
Language	English