Mahr Millimar C 1200 User Manual

40
Mahr GmbH • Millimar C1200
ü
Ó u q p
Calibration Min Nominal value Calibration Max
-1.000 -0 1.000
Measurement Display Setup System
Customer calibration
+
0 0 1 . 0 0
0
Ó
ü
q p
Calibration Min Nominal value Calibration Max
-1.000 -0 1.000
Measurement Display Setup System
Customer calibration
Please set the probe at
Calibration Min
and accept
Ó
ü
q p
Calibration Min Nominal value Calibration Max
-1.000 -0 1.000
Measurement Display Setup System
Customer calibration
Please set the probe at
Calibration Max
and accept
– Enter value for Calibration Max
(e.g. +1.000 mm). Press u to
select the required position and
press q p to enter the required
value.
– Press ü to conrm or Ó to cancel
the selection
– Connect the jumpers to the
Factory standard as illustrated
The following appears on the
display:
Set probe to Calibration Min and
accept
– Press ü to conrm
– Connect the jumpers to the
Factory standard as illustrated
The following appears on the
display:
Set probe to Calibration Max and
accept
– Press ü to conrm

Mahr Millimar C 1200 Specifications

General

Brand	Mahr
Model	Millimar C 1200
Category	Measuring Instruments
Language	English