Maipu MP2600C Series - 1 M128 Module Interface Cable Connection; 1 U Module Interface Cable Connection; 1 VOP;2 VOP Module Cable Connection; 1 VOS;2 VOS Module Cable Connection

MP2600D, MP2600C & MP1700E Series Installation Manual V1.4
Maipu Confidential & Proprietary Information Page 48 of 52
1M128 Module Interface Cable
Connection
 Step 1: Insert RJ11 plug of 1M128 module cable to LINE jack.
 Step 2: After power on, please check ACT status of 1M128 interface
module. If the indicator is off, please check the line.
1U Module Interface Cable Connection
 Step 1: Insert RJ11 plug of 1U module cable to external line;
 Step 2: After power on, please check ACT status of 1M128 interface
module. If the indicator is off, please check the line.
1VOP/2VOP Module Cable Connection
Connect VOP module cable according to the following steps:
 Step 1: insert telephone line to RJ11/RJ45 interface of 1VOP/2VOP,
and another side to telephone.
 Step 2: when having the phone call, pay attention to the indicator of
1VOP/2VOP card back panel: the indicator and Active LED should be on.
1VOS/2VOS Module Cable Connection
Connect VOS module cable according to the following steps:
 Step 1: Insert telephone line to RJ11/RJ45 interface of 1VOS/2VOS,
and another side to small switch or external junction box.
 Step 2: When having the phone call, pay attention to the indicator of
1VOS/2VOS card back panel: the indicator and Active LED should be
on.