MP2600D, MP2600C & MP1700E Series Installation Manual V1.4
Maipu Confidential & Proprietary Information Page 45 of 52
Module Interface Cable
Connection
1SA Module Cable Connection
Before connecting sync/async serial, ensure the following two points:
Equipment type: The equipment type connecting sync/async serial,
which is sync/async or DTE/DCE. Access equipment requires signal
standard, baud rate and sync clock.
DTE/DCE: Sync/async serial accesses external Modem or TA (terminal
adapter) as dialup interface. Sync serial has two modes - DTE and DCE.
Router is used as DTE equipment.
DTE and DCE equipment:
Equipment type Interface type Equipment
DTE Pin type
PC
Router
DCE Hole type
MODEM
Multiplexer
CSU/DSU
Rate and transmission distance: Sync/async serial supports
different signal standards and baud rates in different working modes.
Choose cables as per prevailing conditions.
To Next Page
Loading...
