Model No.
Description
PRODUCT
C
ONCEPT AND MAIN APPLICATIONS
P 1/ 2
Specification
Standard equipment
Optional accessories
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
110
120
220
230
240
13.6
13.0
6.8
6.5
6.3
50/ 60
50/ 60
50/ 60
50/ 60
50/ 60
1,430
---
1,430
1,430
1,430
---
---
---
---
---
---
---
---
---
---
Current (A)
Note: The standard equipment for the tool shown above may vary by country.
LS1017L, LS1018L
Slide Compound Saw 255mm (10")/ 260mm (10-1/4")
Holder set
TCT saw blades
Holder assemblyHorizontal vise
Stand set
Vertical vise ...................... 1 pc
Dust bag ............................ 1 pc
Triangular rule .................. 1 pc
TCT saw blade .................................... 1 pc
Socket wrench (with Hex wrench) ....... 1 pc
Holder set ............................................. 2 pcs
No load speed: min-
1 = rpm
Double insulation
Diameter
Hole diameter
Model No.
LS1017L LS1018L
Yes*
1
Protection against electric shock
Cord length: m (ft)
Weight according to
EPTA-Procedure 01/2003:
kg (lbs)
Lock-off switch
Electric brake
Electronic
control
Soft start
Constant speed
Saw blade:
mm (")
Yes
Yes
No
Yes
4,200 4,300
255 (10) - 260 (10-1/4)
European countries:
30 (1-3/16), North America: 15.88 (5/8), Other countries: 25.4 (1)
2.5 (8.2)
European countries*2: 19.5 (43.0),
Other countries*3: 19.5 (42.9)
European countries*2: 19.9 (43.9),
Other countries*3: 19.8 (43.5)
*
1 Uses dry-cell battery as the power source.
*2 with TCT saw blade and “Blocking mechanism at the rest position”
*3 with TCT saw blade
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
581 (22-7/8) 633 (25)
LS1017L LS1018L
Model No.
Models LS1017L and LS1018L are developed as more cost-competitive
255/ 260mm (10"/ 10-1/4") Slide compound saws.
The specification differences between both models are:
LS1017L: Bevel range of 45 degrees left and 5 degrees right
LS1018L: Bevel range of 45 degrees left and right
Additionally, both models are equipped with laser marker for easy trace
of cutting line.
See next page for the cutting capacity.
Laser marker
[Illustrated above is LS1018L.]
T
ECHNICAL INFORMATION
H
:
/
To Next Page
Need help?
General
