5-9
o If YES is selected, the green POWER button on the front of the control module turns an
amber color, indicating the system has shut down.
o Touch NO to return to the previous screen.
3. Turn the control module off at the back of the system (On/Off power switch).
4. Unplug the power cord from the grounded wall outlet.
5. Before disconnecting the holster’s electrical cable from the control module, ensure the probe has
been removed from the holster.
6. Disconnect the holster electrical cable from the control module.
7. Clean and disinfect the holster for later use as described in Chapter 7: Cleaning and Disinfection.
NOTE: The Mammotome revolve Dual Vacuum-Assisted Biopsy System should be shut down once
per day.
To Next Page
Loading...