M&R Companies 440 Medinah Rd. Roselle, IL 60172 USA 45
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
Fill Ink and Cleaning Solution Tanks
When the ink tank is empty, the message M-TANK LOW appears on the Printer Control Panel screen. When the
cleaning tank is empty, the message F TANK LOW appears on the Printer Control Panel screen. When the tank
is filled, the message is automatically eliminated.
Remove cap and fill the left ink tank (1) with ink or the right cleaning tank (2) with cleaning fluid. Replace caps.
Clean Operator Interface Display Screen
If the screen surface should require cleaning, clean the surface before turning on power. Use a clean, lint-free
wiper or paper towel lightly moistened with clear clean water and gently wipe the surface of the screen.
Note: Do not use solvents such as acetone, MEK or mineral spirits to clean the screen surface. These
solvents will attack the surface of the screen leaving a dull finish making the display difficult to read.
To Next Page
Loading...
