1 - 27
DISPOSING OF THE MACHINE
MANITOU complies with the regulations deriving from Directive 2000/53/CE relating to machine end-of-life.
This machine contains no substances or materials forbidden by Directive 2000/53/CE.
NOTE: Consult your dealer before disposing of the machine.
RECYCLING OF MATERIALS
METALS
• Metals are 100% recoverable and recyclable.
PLASTICS
• Plastic parts are identified with a marking in accordance with current regulations.
• A limited range of materials is used to simplify the recycling process.
• The majority of the plastic components are made of "thermoplastic" plastics, which are easily recycled by melting,
granulating or grinding.
RUBBER
• Tires and seals can be ground for use in cement manufacture or to obtain reusable granules.
GLASS
• Glass items can be removed and collected for processing by glaziers.
ENVIRONMENTAL PROTECTION
By entrusting the maintenance of your machine to the MANITOU network, the risk of pollution is limited and the contribution
to environmental protection is made.
WORN OR DAMAGED PARTS
• Do not dump them in the countryside.
• MANITOU and its network have signed-up to a scheme of environmental protection through recycling.
USED OIL
• The MANITOU network organizes the collection and processing of used oil.
• By handing over your waste oil to MANITOU, the risk of pollution is limited.
USED BATTERIES
• Do not throw away batteries, as they contain metals that are harmful for the environment.
• Return them to the Manitou network or any other approved collection point.
NOTE: MANITOU aims to manufacture machines that provide the best performance and limit polluting emissions.
647866 M1 (A012021)
TMT ... K ST5 S1
To Next Page
Loading...
Need help?
General