CRANE INSTALLATION 800D
10-8
Published 5-27-2018 Control # 039-06
Add any other required mounting or crane options.
Check the final unit weight with a full load of diesel [@
7.3 lb per gallon (0,87 kg per liter)] and men (@ 200 lb
(90 kg) per man) to ensure that the axle ratings have not
been exceeded so that DOT certification requirements
can be met.
After the unit is completely assembled, the stability test
must be run in accordance with “Stability Test
Procedure” page at the end of this section to verify crane
stability.
19.5 in
(495 mm)
79 in
(2010 mm)
Subbase 22 ft 3445 lb
(1563 kg) 245.25 in
(6229 mm)
261 in
(6629 mm)
33 in
(838 mm)
0 in
69 in
(1752 mm)
328 in
(8331 mm)
1300 lb (590 kg)
Rear Stabilizer Wt.
161.5 in
(4102 mm)
17,710 lb (8033 kg)
8100D Crane Wt.
9451
Rear Axle Weight Front Axle Weight
Base Unit
8534 lb 8072 lb
3870 kg 3661 kg
Counterweight 696 lb 454 lb
315 kg 205 kg
Add
Crane
Weight
= 10,958 lb (17,710) - 10,958 = 6752 lb
= 4970 kg (8033) - 4970 = 3063 kg
Rear
Stabilizer
Weight
= 1633 lb (1300) - 1633 = -333 lb
= 741 kg (590) - 741 = -151 kg
22 ft
Sub-
bass
= 3237 lb (3445) - 3237 = 208 lb
= 1469 kg (1563) - 1469 = 94 kg
Total
25,058 lb 15,153 lb
11 365 kg 6873 kg
(17,710) × 161.5
261
---------------------------------------------
(8033) × 4102
6629
--------------------------------------
(1300) × 328
261
-----------------------------------
(590) × 8331
6629
-----------------------------------
(3445) × 245.25
261
-------------------------------------------
(1563) × 6229
6629
--------------------------------------
Fo
r
Reference
Only
To Next Page
Loading...
Need help?
General
