Mannesmann INDRAMAT ECODRIVE DKC01.1 - Overview of Diagnostic Messages

ECODRIVE DKC01.1/DKC11.1 Drive Controllers
DOK-ECODRV-ASE-02VRS**-WAR1-EN-P • 07.96 Diagnostic Message Description 1-1
1 Diagnostic Message Description
1.1 Overview of the Diagnostic Message Descriptions
Diagnostic Message Types
Each operational state of the drive controller will be characterized with a
diagnostic message.
Therein, it will be differentiated between:
• • Error diagnostic message
• • Warning diagnostic message
• • Command diagnostic message
• • State diagnostic message
• • Process states
Construction of a diagnostic message
A diagnostic message consists of:
• Diagnostic number and a
• Diagnostic text
F2/28 excessive output error
diagnostic number
diagnostic text
Figure 1-1: Construction of a diagnostic message from a diagnostic number and
a diagnostic text.
In the example shown, the “F2” and “28” alternate on the H1 display.
The parameter P-0-001, diagnostic number; appears in hexadecimal
form.
Also, the drive controller stores the diagnostic number and diagnostic text
as the string "F2/28, excessive output error" in the parameter
S-0-0095, diagnostic message.