Mannesmann VDO E-Tacho 1323.02 - Prerequisites of the System

1 Prerequisites of the System
4 Programming Instructions E-Tacho 1323.02
1 Prerequisites of the System
The expanded performance range “Programming
E-Tacho“ has been realised for the testing devices
MTC 1602.04, ATC 1601.26 and STC 1601.25 by
means of the following firmware/ software version:
l Bracket (Interface) from firmware 06:00
l BTC I or BTC II from testing software 07:00
l Additionally, the “programming line E-Tacho“ is part
of the supply schedule.
Fig. 1: Programming line E-Tacho, item no. 1601.78.126.00
(1) Plug A white (4) K-Line Adapter
(2) Plug B yellow (5) Plug for bracket
(3) Plug D brown (6) Power supply for E-Tacho
2
3
1
5
4
6