Mannesmann VDO E-Tacho 1323.02 - Accessing Variable Speed Menu with ATC 1601.26; Accessing Variable Speed Menu with STC 1601.25

4 Test Speed Display
20 Programming Instructions E-Tacho 1323.02
4.1.2 ATC 1601.26
Display mask Display contents Input Programming procedure
1a
Initial menu:
Pull down the “Device testing“
menu by means of F3 or the cursor
and ...
confirm.
l
l
l
2b
Pull down the “Variable speed“
menu and ...
confirm.
The submenu “Variable speed “ is displayed.
➥
Further steps see chap. 4.2 Operational Procedure
Variable Speed.
4.1.3
STC 1601.25
Display mask Display contents Input Programming procedure
l
l
l
Initial menu:
1b
Pull down the “Variable Speed“
menu and ...
confirm.
The submenu “Variable speed “ is displayed.
➥
Further steps see chap. 4.2 Operational Procedure
Variable Speed.