Mannesmann VDO E-Tacho 1323.02 User Manual

5 Error Recovery
22 Programming Instructions E-Tacho 1323.02
5 Error Recovery
In case an error occurs during
programming, an encoded message is
shown on the display.
System error
Code Error cause Recommended measures
01 There is no file available.
02 It is not possible to read one file.
03 It is not possible to write in one file.
04 It is not possible to open one file
07 It is not possible to close one file.
08 It is not possible to load a display mask.
Transmission error
Code Error cause Recommended measures
20 Hash total error.
, , ,
21 Negative response within the testing device. Repeat programming
procedure.
22 Interrupted interface. Reinsert programming line
E-Tacho, repeat procedure.
23 Unknown device is connected. Possibly wrong test object
or wrong programming
cable connected.
In case an error may not be remedied by the measures
listed above, please contact your competent VDO Kienzle
dealer.
Restart testing device;
Press the keys
, , ,
one after the other.

Mannesmann VDO E-Tacho 1323.02 Specifications

General

Brand	Mannesmann
Model	VDO E-Tacho 1323.02
Category	Measuring Instruments
Language	English