Mannesmann VDO E-Tacho 1323.02 - Variable Speed Setting Operational Procedure

4.2 Operational Procedure Variable Speed
© Mannesmann VDO AG 21
4.2 Operational Procedure Variable Speed
Display mask Display contents Input Programming procedure
1
Enter the new speed value, e.g.
100 km/h, and ...
confirm.
2
Enter the value which has been
programmed in chap. 3.1 v-
Adjustment and ...
confirm.
The E-Tacho is triggered with 100 km/h and a
k-value = 8000 .
3
Return to display mask 1 for new
value input by means of the Enter-
key.
4
Fine setting
(in 1 km-steps).
Return to display mask 1.
End of program, the initial menu is
displayed.