39
D00619EN - v0 SWING OPERATOR - INSTALLATION MANUAL
7 SAFETY
7.3 Identifying Dangerous Areas in the Machine
The opening and closing areas and the operator area have moving parts; they are considered dangerous areas and it is im-
portant to know them:
OPENING AREA
CLOSING AREA
OPERATOR AREA
DOOR AREA
C
E
A
A
E
E
O
A A
C
E
E
• Before performing any type of task on the machine, the work area must be checked :
• Keep the area clean and tidy.
• Ensure there is sufficient light.
• Ensure the absence of flammable liquids and gases in and around the work area.
• Clearly signpost the work area to keep away all the people not involved in the work.
• Driving and the use of lifting equipment and accessories:
• Do not drive lifting equipment over people and/or work areas.
• Use lifting and maintenance equipment correctly, with gentle movements and never overload.
• Transport suspended loads through areas of total visibility.
• Wear suitable clothing:
• Do not wear baggy clothes, jewellery, ties or other items that may get caught in moving parts.
• Long hair must be tied back.
• Make use of the necessary PPE (Personal Protection Equipment).
• Avoid stretching:
• Avoid postures that cause fatigue.
• Stand firmly on the ground.
• Never use any part of the machine as a support for people or objects.
• Always be alert:
• Be vigilant.
• Use common sense.
7.1 General Safety Instructions
7.2 Required Personal Protection Equipment
The PPE necessary to safely perform installation and maintenance tasks is:
• Protective gloves.
• Protective shoes against mechanical hazards.
To Next Page
Loading...