EasyManua.ls Logo

Mark 7 APEX 10 - Important Safety Instructions

Mark 7 APEX 10
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MARK 7® RELOADING APEX 10 USER MANUAL VERSION 1.0, COPYRIGHT 2021
ALL RIGHTS RESERVED
3
Important Safety Instructions
Read this manual completely prior to installation and operation. Understand all safety and
operating instructions. Failure to comply with the WARNINGS and instructions may result in serious injury
or death. WARNINGS throughout this manual will be symbolized by the yellow WARNING symbols seen
below.
WARNING Activities using the Mark 7® APEX 10
TM
are inherently dangerous and may lead to injury and
even death. Actions because of using the Mark 7® product are solely the responsibility of the user if you
get injured through the reloading process or through the use of ammunition as a result of the reloading
process it is your fault.
WARNING - Mark 7® equipment should only be operated by trained personnel that follow all safety
precautions. Failure to do so could result in serious injury or death.
WARNING Never operate the Mark 7® APEX 10
TM
while impaired.
WARNING Never operate the Mark 7® APEX 10
TM
without using high quality brass and always use
sufficient lubrication on your brass while operating the Mark 7® APEX 10
TM
.
WARNING Always wear protective eyewear to protect eyes from being injured. Flying debris may result
when using this equipment. Always wear protective clothing that covers arms, legs and neck to protect
from injury. It is the responsibility of the user to ensure that appropriate protective clothing and
equipment are used to provide protection from those hazards to which personnel are exposed or could
be exposed while working with this product. Failure to do so could result in serious injury or even death.

Related product manuals