M6 System | V4 | Installation
Mac Pro Cabling
Connect equipment to the Mac pro according to the following cabling.
Cable Connected to
1 Thunderbolt to HDMI/VGA/DVI adapters +
monitor cable*
Up to 6 monitors
2 Ethernet cable (Ethernet port on the left) PoE switch
3 Audio cable Loudspeakers
4 USB trackball transmitter Wireless trackball mouse
5 Scala software dongle -
6 Ethernet cable (Ethernet port on the right) Ethernet switch †
7 Power cable 100-240V AC power supply ‡
* Or thunderbolt cable if monitor is compatible
† The Ethernet cable can be connected direclty to an internet router if you have no NMEA
multiplexer, or directly to the NMEA multiplexer if no internet router. Using an Ethernet switch is
only useful if you need to connect to both the NMEA multiplexer and the router.
‡ We recommend to use an Uninterruptible Power Supply (UPS) to prevent problems if the mains
power fails.
| 16
To Next Page
Loading...
