Marport M6 - Appendix; Appendix A: Frequency Plan

M6 System | V4 | Appendix
Appendix
Appendix A: Frequency Plan
When the system is installed, you can add sensors to it. It is important to carefully plan the setup of
your sensors before adding them to the system. You can create a table with a list of frequencies and
complete it when you add sensors.
Boat & Channel Codes
This list shows the standard frequencies for PRP telegrams. When you configure boat codes, make
sure to respect the correct interval between frequencies (see table above).
Codes
BC/CH Frequency FID (Scanmar)
C-1/CH1 42833 45
C-1/CH2 41548 32
C-1/CH3 41852 35
C-1/CH4 40810 25
C-1/CH5 42500 42
C-1/CH6 43200 49
C-2/CH1 42631 43
C-2/CH2 41417 31
C-2/CH3 41690 33
C-2/CH4 40886 26
C-2/CH5 42300 40
C-2/CH6 43100 48
C-3/CH1 42429 41
C-3/CH2 41285 30
C-3/CH3 41548 32
C-3/CH4 40970 27
C-3/CH5 42100 38
C-3/CH6 43000 47
C-4/CH1 42226 39
C-4/CH2 41852 35
C-4/CH3 41417 31
C-4/CH4 41160 29
| 73