M6 System | V4 | Legal
Legal
History
V1 07/12/17 First release
V2 03/09/18
New topics:
• New active wideband hydrophones (NC-1-08) documented, see List of
Marport Hydrophones on page 17.
• Additional hydrophone cabling procedures: Simrad ITI Hydrophone
on page 34, Passive Hydrophone from other brands + Wideband
Preamplifier on page 37, Receiving Hydrophone Data on Two Systems
on page 38.
• Adding TE SC Sensor to the Receiver on page 43
V3 07/06/18
Improved topics:
• Active Wideband Hydrophone on page 27: for NC-1-08 hydrophones
with serial number 4054875, 4054845, 4054831 and after, connect the
-12V wire. NC-1-08 hydrophones with a lower serial number need to be
returned and replaced.
• Hydrophone Cabling on page 19: now includes guidelines on how to
connect Marport hydrophones without using a junction box.
• Interference Check on page 62: more detailed information about
Spectrum page.
V4 11/30/18
New topic:
• Adding Temperature Data from the Hydrophones to the System on page
41: how to display on Scalathe temperature of the water surface
received from the hydrophones.
Improved topic:
• Product references have been added in equipment list.
• Appendix A: Frequency Plan on page 73: drawings have been
changed, frequencies are now allocated between 34 kHz and 36 kHz
and frequency ranges of narrowband and wideband hydrophones are
indicated.
Copyright
© 2018 Marport. All Rights reserved.
No part of this document may be reproduced, stored in a retrieval system or transmitted in any
form by any means; electronic, mechanical, photocopying or otherwise, without the express
written permission from Marport. “Marport ”, the Marport logo and Software Defined Sonar are
| 4
To Next Page
Loading...
