M6 System | V4 | Servicing and Maintenance
2.
Make sure that the network called Ethernet 2 is at the top of the list, then is followed by the
network called Ethernet 1.
3.
If not, to change the order click the tooth wheel icon at the bottom of the list and select Set
Service Order.
VMware Fusion Pop-Up Message
A VMware Fusion message appears when adding a new USB key.
This message is due to the virtual machine (VMware Fusion) installed on the computer.
1.
From the message box, select Remember my choice and do not ask again.
2.
Click Connect to Mac.
3.
If the M6-Processor window appears, click
to hide it. DO NOT close the M3-Processor window
or you will have to reboot the system.
| 70
To Next Page
Loading...
