M6 System | V4 | Installation
WiFi connection / No wired Ethernet network
Connect the multiplexer according to the following schema if:
• you connect to the internet via WiFi,
• or you do not have a wired Ethernet network.
Cable Connected to
1 NMEA2000 device (only for
Miniplex-3E-N2K)
NMEA2000 bus
2 NMEA2000 bus (only for Miniplex-3E-
N2K)
Device outputting NMEA2000
3 NMEA0183 input bus (can be plugged into
input 1 to 4)
Device outputting NMEA0183
4 NMEA 0183 output bus Device receiving NMEA0183
5 Power cables 12V DC power supply
6 NMEA 0183 devices NMEA 0183 output or input bus
7 Ethernet cable Computer (Ethernet port on the right)
| 50
To Next Page
Loading...
