OP32 – Installation manual
2. SYSTEM COMPONENTS
OP32 is a measurement system with optical transmission for high-precision industrial applications.
The are two possible system configurations depending by the type of receiver used (E83/ORI
2.1 Configuration with E83 Receiver
The system consists of three units:
• OP32/OP32E
probe/transmitter:
in a one body there are a infrared transmitter powered by battery and a touch probe.
This unit is designed to be mounted on a toolholder support and be used by a machine tool
(milling machine, lathe, machining center etc..) as a standard tool.
• E83 Receiver
This is an infrared transceiver connected with cable to interface that provides power and
data communication.
This unit is mechanically fixed to the machine.
• E83 Interface
Electronics which is connected to one or two stations from which it receives datas
transmitted by the probe / transmitter.
After a processing updates the status of outputs to the CNC.
A. OP32/OP32E Probe/rtansmitter
B. Finger
C. E83 Receiver
D. E83 Interface unit
E.
“Anaconda” type receiver cable protective sheath
(optional)
F. Adjustable receiver support
Figure 2-1. System components – configuration with E83 receiver.
To Next Page
Loading...
