MATO MTS600R - 7 Memory Management; JOB Manager

MTS600 Instruction Manual
44
7. Memory management
After power on, press [MENU] key on the panel to
enter the main menu, select "F2- Memory Manager" to
enter memory management mode. In this mode, you
can perform the function related to JOB and data in
instrument's memory.
7.1 JOB manager
Press [F1] to select "JOB" in <Memory Manager>
menu, the list of JOB in the memory is displayed on
the screen, including JOB name, the number of data
items already stored in the JOB.
l The JOB marked with “*” is the current job
selected to store data.
Method of operating JOB list：
l Press [▲] [▼] to move the cursor up and down from line to line;
l [F1]([1X>>])is a speed-up key, It can be set that when pressing [▲] [▼] ,
cursor moves according to a line, one page, two pages, or three pages.(key
caption 3X>>,6X>>,9X>> )
l Press [TOP] to move the cursor to the list’s beginning .
l Press [LAST] to move the cursor to the list’s end.
l Press [SRCH] to input the JOB name and search for it.
l Press [OPTN] to enter the menu of JOB manager option.
7.1.1 Review and delete record in JOB
①In the list of JOB, press [▲] [▼] to move cursor to
the desired JOB and press [OPTN] to enter <JOB
Manager> menu.
Memory Manager <1/2>
F1--JOB
F2—Known Coord.
F3—CODE
*MYJOB 50
JOB001 128
JOB002 285 ↓
1X>> TOP LAST SRCH OPTN
JOB Manager <1/2>
F1-View
F2-Select
F3-Delete