Matrix SATATYA Devices Manual 129
End date: The user can select the End Date and End Time by clicking the up-down arrow buttons to specify the
end of particular playback of the recording.
You can enter the value for “Start time” and “End Time” using keyboard as well.
Type: Select the Type of Recording to be viewed in playback from the up-down arrow buttons. The options
available are:
•All
• Manual
•Alarm
• Schedule
•COSEC
Camera: Select the desired Camera whose recording is to be played back from the drop-down list. The camera list
contains only those cameras whose access rights are given to the user.
Search: Click on the Search button. The system will list the video events associated with the selected search filters
in the Record List grid.
The arrow buttons enables the user to browse through the various pages of the record
list.
To view the playback of a particular record, select the recording and Click on Play button. The playback of the
selected record starts in the selected window on the screen.
Right Click on the Playback window and Click on Toolbar button, the Playback Control Panel appears on the
bottom of the window.
The Playback Control Panel, shown in the following figure contains the various controls on the Playback interface.
For the description on Playback control buttons, See “Playback Toolbar” on page 144.
Backup: The user can take backup of the selected files on USB for manual backup in AVI format by selecting the
files and then clicking on Backup button.When selecting only single file, it is possible to crop the recorded video by
defining start and end time of the record and then taking backup of the cropped file on the USB.
To Next Page
Loading...
Need help?
General
