Matrix SATATYA NVR0801X System Manual

Matrix SATATYA Devices Manual 211
• User Name/Password: Enter the username and password of your choice with which the camera is to be
added in the device.
• Retain Camera Default Profile: If the box is checked then live stream for camera will auto start with
camera default profile. If not checked then user can set the desired parameters of Main Stream and Sub
Stream for live stream.
Auto Add Camera
1. Auto Add camera feature is supported in all the SATATYA Devices.
2. The features is configurable using Device Client and Local Client both.
Auto add camera feature allows the user to add the cameras in the Device via camera initiation. In this, camera
initiates communication with the device client and gets added to the device automatically.
To achieve camera initiation, you need to prior add the Device Client Server details (IP address and TCP
Port) at the Matrix IP camera web page
• Click Set button to configure the parameters for Camera Initiation feature as shown below.
• Specify the TCP Port to establish the communication between Device client and IP camera.
Specify the same TCP Port as specified at the Matrix IP camera web-page.
• Specify the Poll duration in seconds till which the IP camera should wait for response from the device for
communication.

Matrix SATATYA NVR0801X Specifications

General

Brand	Matrix
Model	SATATYA NVR0801X
Category	DVR
Language	English