Matrix SATATYA Devices Manual 213
Video Pop-up Duration: Specify the duration in seconds after which the video pop-up window should get closed
automatically. The default value is 10 seconds.
In Device Client you can also close the video pop-up window manually by clicking on Close button as shown in the
below screen.
In Local Client you can also close the video pop-up window manually by clicking the Exit button as shown in the
screen below.
Video Standard: Select the Video Standard from the options of PAL or NTSC.
Analog Cameras: Select the analog cameras from the drop down options of 4,8,12 and 16.
IP Cameras: Based on the number of analog cameras selected, the number of IP cameras is updated. The total
number of cameras being 24.
To Next Page
Loading...
Need help?
General
