Matrix SETU ATA211 SIP-FXS-FXO

Matrix SETU ATA211 V1 System Manual 119
• Program the Name in this Table using Max 16 characters allowed. All ASCII characters allowed.
Default = Blank.
• Program the destination route as (SIP1, SIP2 or SIP3) corresponding to each number. Default = SIP1.
Speed Dial Table-SIP:
• Program the Number to be dialed using SIP account using Max 16 character allowed. Allow numerals
(0~9), '*' and '#'. Default = Blank.
• Program the Name using Max 16 characters allowed. All ASCII characters allowed. Default = Blank.
• The destination route is fixed as (FXO) port only, for the numbers to be dialed using SIP Account.
Default = FXO.
Relevant Topic:
1. “SIP Accounts” 104