EasyManuals Logo

Matrix SETU ATA211 SIP-FXS-FXO User Manual

Matrix SETU ATA211 SIP-FXS-FXO
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Matrix SETU ATA211 V1 System Manual 27
Select 'Enable Static IP', if you want to assign IP address, Subnet Mask and Gateway address
manually. Configure all the fields manually if you have selected this option.
For more details, please refer topic “WAN Port” in Configuring SETU ATA211.
8. Click on 'SIP Accounts' and on 'SIP Accounts' program 'Enable SIP Account' for the SIP Account which is
to be used and program the parameter 'SIP Id' for this SIP Account as '*'. Also program the parameter
'User Symmetric RTP?' as 'Yes' (for NAT type of Router at head office 'Symmetric')
For more details on programming SIP Account parameters, please refer topic “SIP Accounts” in
Configuring SETU ATA211.
9. Click on 'Peer to Peer Call Table' link and program following parameter:
a. Number field with the number (say, 3001) assigned to the FXS port of the ATA211 located at the head
office.
b. 'Destination Address' with the IP address of broadband router/modem located at the head office. if you
are comfortable dialing IP addresses directly after lifting the handset, Peer-to-Peer table need not be
programmed.
For more details, please refer topic “Peer-to-Peer Call Table” in Configuring SETU ATA211.
Corporate Users - Scenario2: (refer Fig. 5 - When ATA211 is connected behind the
Broadband router with NAT type 'Other than Symmetric' at both locations.)
Following steps should be done at both the locations:
Configure the Broadband Router at both locations as follows:
1. Forward SIP listening port (e.g., 5060 for both Routers) in Router to IP address of WAN port of ATA211
connected behind the respective router.
Configuring ATA211:
1. To access Jeeves using computers connected to WAN port of ATA, ensure that the WAN port of ATA211
and the computers in the LAN are in the same subnet. The default WAN IP address of ATA211 is
192.168.001.171 and the subnet mask is 255.255.255.0.
2. Change the IP address and the subnet mask of the WAN port of ATA211 (if required) using telephone
instrument.
Please refer topic “Programming Options”.
3. Program following parameters (for both locations):
Open Web Jeeves of ATA211 by entering the WAN IP address of the ATA211 in the URL field and press
Enter.
Login as 'Admin' into the Jeeves of ATA211 using the Admin password (default 1234). You will reach
the Home page.
Click on 'WAN Port' link and enter the values of IP address, Subnet mask, Gateway and DNS address
in the respective fields.
On the 'WAN Port' page, enable STUN by the parameter 'Use SIP port fetched using STUN?' (default
'YES'). Also program the STUN server address (By default STUN server port is '3478').
Click on 'SIP Accounts' and program 'Enable SIP Account' for the SIP Account which is to be used.
Program the parameter 'SIP Id' for this SIP Account as '*' (for configuring it as P2P Account).
On 'SIP Accounts' configure the parameter 'Source Port IP Address' as 'Use IP Address fetched using
STUN'.
4. Program following parameters (for Location A):

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix SETU ATA211 SIP-FXS-FXO and is the answer not in the manual?

Matrix SETU ATA211 SIP-FXS-FXO Specifications

General IconGeneral
BrandMatrix
ModelSETU ATA211 SIP-FXS-FXO
CategoryGateway
LanguageEnglish

Related product manuals