Matrix SETU ATA211 V1 System Manual 77
For dialed number strings which are not programmed in Table:
• 'If the dialed number does not match with either of the programmed number in the dialed number table and
the call is made from FXS port Route the call through': Configure destination route for the numbers dialed
from FXS port and no match is found in table for the dialed number. Select the destination route from:
None/SIP1/SIP2/SIP3/FXO. Default = SIP1.
• 'If the dialed number does not match with either of the programmed number in the dialed number table and
the call is made from FXO port. Route the call through': Configure destination route for the numbers dialed
from FXS port and no match is found in table for the dialed number. Select the destination route from:
None/FXS/SIP1/SIP2/SIP3. Default = SIP1.
Relevant Topics:
1. “SIP Accounts” 104
2. “Called Party Number Table” 64
3. “FXO Port” 86
To Next Page
Loading...
