Matrix
SIMADO GFX11 System Manual
15
Protecting the System
Installation Precautions:
• Do not install in direct sunlight and excessive cold or humid
places.
• Do not install at places where sulfuric gases are produced and in
areas where there are thermal springs, etc. because it may
damage the equipment or contacts.
• Do not install at places where shocks or vibrations are frequent or
strong.
• Do not install at dusty places or places where water or oil may
come into contact with the system.
• Do not obstruct area around the system (for reasons of
maintenance and inspection be especially careful to allow space
for cooling above and at the sides of the system).
Important Safety Instructions:
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
• Read and understand all instructions.
• Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a dry and soft cloth
for cleaning.
• Do not use this product near water. For example, near a bathtub,
wash bowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool.
• Do not open the system in power ON condition.
• Do not place this product on an unstable cart, stand or table. The
product may fall, causing serious damage to the product.
• Interfacing cables should not touch the exposed power line cable.
• This product should be operated with proper supply voltage. If you
are not sure about supply voltage, contact authorized dealer. It is
advisable to give proper, stabilized power.
• Do not allow anything to rest on the power cord of product or AC-
DC Adapter. Do not place this product where the cord will be
misused by people walking on it.
• Do not overload wall outlets and extension cords as this can
To Next Page
Loading...
Need help?
General
