Matrix simado gfx11 - Hotline

Matrix
SIMADO GFX11 System Manual
59
Hotline
What’s this?
Matrix system offers, a feature by which the user has to just pick up
his handset and the system will automatically dial out the fixed
destination number. This feature is called Hotline.
How it works?
• When the Hotline is enabled, lifting the handset gives the regular
dial tone. If the user does not dial anything for a time period of
Hotline Delay Timer, SIMADO GFX11 places the Hotline call to
the programmed number.
• This delay provides a facility to the user to dial out other numbers
without canceling Hotline.
How to program?
Use the following command to enable/disable Hotline:
281-Flag-#*
Where,
Flag Meaning
0Disable
1 Enable
By default, the Hotline is Disabled.
Use the following command to program the hotline destination
number:
282-Destination Number-#*
Destination Number is number string of maximum 16 characters.
Use the following command to set the hotline delay timer:
283-Timer-#*
Where,
Timer is from 1 to 9 sec.
By default, Hotline Delay Timer is 3 seconds.
Example:
Activate Hotline and program the external number 0265 630555 as