Matrix
68
SIMADO GFX11 System Manual
Programming the System through FXS Port
What’s this?
The SIMADO GFX11 is a flexible system and can be programmed to
suit your requirements. The SIMADO GFX11 can be programmed by
entering into programming mode. Programming can be done at two
levels viz. System Engineer Level and System Administrator Level.
System Engineer Level
• At this level, System Engineer does the programming and it is
called System Engineer Mode.
Programming Level
SA Level
SE Level
• System Engineer(SE) is a person who programs the system as
per the need.
• This mode allows the SE to program the system for basic
functions like programming through FXS etc.
• This mode is password protected so that no other person can
make any unauthorized alterations and subsequent misuse of
features and facilities. The password is called SE Password.
• Default SE Password is 1234.
• In case the SE Password is forgotten, the same can be reset to
its default value by changing the jumper position (J2). For more
details, please refer section ‘
System Security (Passwords)’.
System Administrator Level
• At this level, System Administrator does the programming. This
is called System Administrator(SA) Mode.
To Next Page
Loading...
Need help?
General
