Matrix simado gfx11 System Manual

Matrix
SIMADO GFX11 System Manual
69
• As the name suggests, only housekeeping functions required for
administration purpose can be done from this mode. Only the
programming commands for the following features are possible
from SA Mode:
• Change SA Password.
• Display Software Version-Revision.
• Display Call Duration.
• Call Divert.
• This mode is password protected so that no other person can
make any unauthorized alterations and subsequent misuse of
features and facilities. The password is called SA Password.
• Default SA Password is 1111.
• In case the SA Password is forgotten, the same can be changed
from SE mode. For more details, please refer section ‘
System
Security (Passwords)’.
How to use it?
Enter SE Mode
1 Lift handset. Dial tone
2
Dial
#*-19-SE Password. Programming tone
Enter SA Mode
1 Lift handset. Dial tone
2
Dial
#*-18-SA Password. Programming tone
In both the cases on issue of invalid password user will get error
tone. The error tone will be stopped only by going ON-Hook.
Important Points:
• Password is 4-digits secret code used to avoid unauthorized
access to programming mode.
• Password is programmable. We can change the password as
per the requirement.
• In case the password is forgotten, the same can be set to its
default value by defaulting the system.
• System gives programming tone on entering programming mode.
• If the password is not entered correctly, system gives error tone.

Matrix simado gfx11 Specifications

General

Brand	Matrix
Model	simado gfx11
Category	Gateway
Language	English