Matrix simado gfx11 System Manual

Matrix
70
SIMADO GFX11 System Manual
• Only one person can enter programming mode at a time.
• If both the SE/SA password happen to be the same the user is
always logged on as SE.
• During programming three types of tones are used.
• Error tone.
• Confirmation tone.
• Programming tone.
• Each valid command is confirmed with confirmation tone.
• Each invalid command generates an error tone.
• In both the cases after tone period expires (3 seconds) user will
get programming tone for the next command.
• During programming if there is an incoming call the user gets an
‘Error Tone’ and the user is automatically out of the programming
mode.
• During programming mode if there is an incoming message ‘NO
Indication’ is given.
• To exit programming mode dial ‘00-#*’ from the programming
tone. You get the SIMADO GFX11 dial tone.
• If the response of the command is expected on display, the user
has to go ON-Hook after the confirmation tone. Once the
information is displayed the user has to go OFF-Hook and he will
get the programming tone.
Relevant Topics:
1.
System Security (Passwords) 80
2.
Call Progress Tones 40
=X=X=

Matrix simado gfx11 Specifications

General

Brand	Matrix
Model	simado gfx11
Category	Gateway
Language	English