Matrix simado gfx11 - Appendix D: System Commands

Matrix
90
SIMADO GFX11 System Manual
Appendix D: System Commands
01 Exit SE/SA Mode
00-#*
02 Select the country for tone type
104-Code-#*
03 Restart the System
105-SE Password-#*
04 Load Default Configuration
106-Reverse SE
Password-#*
05
Change SE programming
Password
107-New SE Password-#*
06
Change SA programming
Password
108-New SA Password-#*
07
To know the software version
and revision
109-#*
08
Enable/Disable SIM PIN request
on Power ON
111-Code-SIM PIN-#*
09 Register the SIM PIN
112-SIM PIN-#*
10 Change the SIM PIN
113-Old SIM PIN-New
SIM PIN-#*
11 Register the PUK number
114-PUK No-SIM PIN-#*
12
Clear the Emergency Number at
an Index
151-Index-#*
13
Program Emergency Number at
an index
151-Index-Emergency
Number-#*
14 Enable/Disable GSM Port
201-Code-#*
15
Enable/Disable CLIR on GSM
Port
202-Mode-#*
16
Enable/Disable Incoming SMS
notification on GSM Port
203-Flag-#*
17
To Enable/Disable the Location
Information Indication
205-Flag-#*
18
Program the answer signal to be
generated on FXS Port
221-Answer Signal-#*
19 Program SLT port CLI Type
222-CLI Type-#*