Matrix
SIMADO GFX11 System Manual
67
Example 2:
A user feels call charges of network operator ‘X’ (MCC 404, MNC
98), will be the cheapest for his SIM card of home region. Second
operator ‘Y’ (MCC 404, MNC 25) is cheaper, but the third operator
‘Z’ (MCC 404, MNC 21) is little cheap for call charges. Then
program the network operator as per priority, as shown below:
He should program the SIMADO GFX11, for manual mode which
doesn’t depend on field strength of the network.
331-2-#* (Network selection mode: Manual)
332-1-40498-#* (1st priority to network ‘X’)
332-2-40425-#* (2nd priority to network ‘Y’)
332-3-40421-#* (3rd priority to network ‘Z’)
Important Point:
• In manual mode, network is not selected as per the field strength
but is selected as per the priority network codes.
=X=X=
To Next Page
Loading...
Need help?
General
