Matrix simado gfx11 - Page 28

Matrix
28
SIMADO GFX11 System Manual
Step 3
Use following command to program numbers in the denied list:
262-Location Index-Number-#*
Where,
Location Index is from 1 to 5.
Number is the telephone number of maximum 16 digits.
By default, Allowed and Denied Lists have no numbers (Blank).
The default Allowed and Denied Lists table looks as shown below:
Location
Index
Number
Location
Index
Number
1B 1B
2B 2B
3B 3B
4B 4B
5B 5B
Denied ListAllowed List
Clear Commands
Command Meaning
261-Location Index-#*
To clear one location from the allowed list
261-0-#*
To clear all locations from the allowed list
262-Location Index-#*
To clear one location from the denied list
262-0-#*
To clear all locations from the denied list
=X=X=