Matrix
SIMADO GFX11 System Manual
39
Option Meaning
1 All calls unconditional
2On busy
3 If not answered
4 When the SIMADO GFX11 is OFF or no coverage
Code Meaning
0 Disable call divert
1 Enable call divert
By default, Call Divert Code is 0. If Call Divert feature is to be
disabled, do not enter ‘Destination Number’.
For example: 620-1-0-#*.
Important Points:
• The Service Provider provides this feature. User can use any of
the above call divert option depending on the requirement.
• More than one type of call divert cannot be set simultaneously.
=X=X=
To Next Page
Loading...
