Matrix simado gfx11 System Manual

Matrix
54
SIMADO GFX11 System Manual
CLI Type Meaning
1None
2DTMF
3 ITU-T V.23 FSK
4 Bellcore FSK
By default, CLI type is 3.
Step 2
Use the following command to program the digits which will be
replaced with ‘+’ in the CLI:
301-Number String-#*
Where,
Number String is maximum of four digits
By default, Number String is ‘00’.
Use the following command to clear the digits programmed:
301-#*
Step 3
Inter digit Wait Timer: The system will dial out the number
received from the user, after expiry of Inter Digit Wait Timer. This
parameter helps to reduce the delay of dialing out the number, after
digits are entered.
Use the following command to program the Inter Digit Wait Timer:
226-Inter Digit Wait Timer-#*
Where,
Inter Digit Wait Timer is from 01 to 99 seconds.
By default, Inter Digit Wait Timer is 05 seconds.
Important Points:
• Flash Timer is fixed, 600ms for ON-Hook detection.
• End of dialing is a mechanism by which end of number string is
interpreted by the system and processing for out dialing is faster.
By default, ‘#’ is considered as end of dialing digit.
Relevant Topic:
1.
CLIP 43
=X=X=

Matrix simado gfx11 Specifications

General

Brand	Matrix
Model	simado gfx11
Category	Gateway
Language	English