36
Chapter 4, Using the Command Center
The Record Settings page in the Command Center lets you set the record
settings for the Monarch HD device. Monarch HD provides settings for recording
your input source for video on demand (VOD), high-quality editing, and
archiving/previewing purposes. Content can be recorded to MOV and MP4 file
formats on a FAT32 or NTFS file system. Because FAT32 limits the recording
file size to 4 GB, you must use an NTFS drive if your recorded file will be greater
than 4 GB. If controlling multiple devices, each device on the network records
based on its own record settings. For details on how to start/stop recording, see
“Control streaming and recording for a single device” and “Control streaming
and recording for multiple devices on the same network”.
For approximate recording file sizes based on the average video data rate and
recording duration, and approximate maximum file durations given the average
video data rate and available disk space, see “About page” on page 46.
¡ Important To save changes made on the Record Settings page (Stream,
Record or Audio), you must click the
Apply button. If you leave the Record
Settings
page before applying the settings, all changes will be lost.
Specify the following settings for recording.
Media
Select the
Media to which you want to record your input source. You can choose
either a USB or SD card slot on the Monarch HD device, or a network location.
For more information on using USB devices or SD cards, including the known
limitations of each, see the sections “USB ports 1 and 2” on page 7, and “SD
card” on page 8.
Maximum recording duration
Enter a
Maximum recording duration to set an overall time limit for your
recording session. The session will automatically end when this limit is reached,
or when the selected storage media is full (whichever occurs first). If you enter a
value of 0, the recording session will continue indefinitely, and will stop only
when your storage media is full.
To Next Page
Loading...
