EasyManua.ls Logo

Matrox Solios eV-CL - Memory; PCI-X to Pcie Bridge

Matrox Solios eV-CL
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Memory 65
Memory
Matrox Solios eV-CL has on-board acquisition memory. It has 128, 256, or
512 Mbytes of linearly addressable 32-bit 216 MHz DDR2 SDRAM to store
acquisition data. This memory has a memory bandwidth of 1.73 Gbytes/sec.
PCI-X to PCIe bridge
The PCI-X to PCIe bridge handles the Matrox Solios eV-CL board’s PCIe
connection to the Host. On-board, Matrox Solios eV-CL uses PCI-X technology
to communicate. To communicate with the Host, Matrox Solios eV-CL transfers
data using the Host’s PCIe bus. The PCI-X to PCIe bridge handles the protocol
conversion.
Under optimum conditions, Matrox Solios eV-CL can exchange data with the
Host at a peak transfer rate of up to 1 Gbyte/sec; the maximum achievable
bandwidth depends on the type of camera and digitizer configuration format
(DCF) used. Optimum conditions include using the board in a PCIe slot with 4
active lanes.
Matrox Solios eV-CL can transfer data between its acquisition memory and the
Hosts physically contiguous, non-paged memory without the help of the Host
CPU.

Table of Contents

Related product manuals