94 Appendix B: Technical information
On the cable adapter bracket, there are two external auxiliary I/O connectors;
these allow you to access the signals of the internal auxiliary I/O connectors from
outside the computer enclosure. Depending on the board you selected, there are
two cable adapter brackets available: one with a DBHD-44 and a DB-9 connector,
and one with two DBHD-15 connectors.
❖ Note that the Matrox Solios eV-CL signal names have a ranking that reflects the
number of signals of that type, format, and direction for a path. For example, two
TTL and two LVDS auxiliary input signals for path 0 would be named
P0_TTL_AUX_IN0, P0_TTL_AUX_IN1, P0_LVDS_AUX_IN0, and
P0_LVDS_AUX_IN1. Notice that the ranking of the LVDS signals also starts at 0.
Camera Link
Video Input
Connector 0
Camera Link
Video Input
Connector 1
Auxiliary I/O
Connector 1
Auxiliary I/O
Connector 0
Cable Adapter Bracket with a
DBHD-44 and DB-9
Camera Link
Video Input
Connector 0
Camera Link
Video Input
Connector 1
Auxiliary I/O
Connector 0
Auxiliary I/O
Connector 1
Cable Adapter Bracket with
two DBHD-15 connectors
To Next Page
Loading...
