96 Appendix B: Technical information
External auxiliary I/O connector 0 on the DBHD-44/DB-9 cable
adapter bracket
External auxiliary I/O connector 0 on the Matrox Solios eV-CLBL and Matrox
Solios eV-CLFL DBHD-44/DB-9 cable adapter bracket is a high-density
D-subminiature 44-pin (DBHD-44
*
) female connector. It is used to transmit
timing and synchronization signals, and transmit/receive auxiliary signals. It
interfaces with the 44-pin internal auxiliary I/O connector on the board, making
the I/O signals accessible outside the computer enclosure.
The pinout for this connector is as follows. The description of each auxiliary signal
states whether the signal is specific to an independent acquisition path and the
type of signals that can be routed onto it.
*. Sometimes referred to as DB-44.
16
31
15
30
44
To Next Page
Loading...
