Maxell MP-WU9101B - IMAGE Menu

52
IMAGE menu
IMAGE menu
Item Description
ASPECT
Switches the mode for aspect ratio.
NORMAL
ó
4:3
ó
16:9
ó
16:10
ó
ZOOM
ó
NATIVE
If there is no signal
16:10 (xed)
• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Switches the OVER SCAN mode.
OFF: Unmagnied display
CROP: Reduced display
ZOOM: Magnied display
V POSITION
Adjusts the vertical position.
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, reset the vertical position to the default
setting. Pressing the RESET button when the V POSITION is
selected will reset the V POSITION to the default setting.
H POSITION
Adjusts the horizontal position.
•
Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, reset the horizontal position to the default
setting. Pressing the RESET button when the H POSITION is selected
will reset the H POSITION to the default setting.
H PHASE
Adjusts the horizontal phase to eliminate icker.
H SIZE
Adjusts the horizontal size.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, reset the adjustment by pressing
the RESET button on the remote control during this operation.
• Images might appear degraded when this function is operated, but
it is not a malfunction.
AUTO ADJUST Adjusts the signal synchronization automatically.