68
Maintenance
In order to ensure the safe use of your projector, have it cleaned and inspected by
your dealer about once every year.
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufciently.
2.
After making sure that the projector is cool adequately, lightly wipe the lens
with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
If the lens is awed, soiled or fogged, it could cause deterioration of display
quality. Take care of the lens, being cautious of handling.
Inside of the projector
Caring for the lens
• Use commercially available lens tissue to clean the lens (used to clean cameras,
eyeglasses, etc.).
• If the lens is heavily soiled, wipe it with a cloth moistened with little water.
• Never use polishing agents, detergents, chemicals, or solvents such as benzine
or thinner.
• Excepting for lens, use a soft cloth to clean. When excessively soiled, dilute a
neutral detergent in water, wet and wring out the soft cloth.
Other care
To Next Page
Loading...
