61
OPTION menu
Item Description
SERVICE
(continued)
INFRARED REMOTE
Turns on/off the Infrared sensor. Wired remote operates regardless
of this item.
REMOTE ID
Select ID and press the ► button.
ALL
ó
1
ó
2
ó
3
ó
4
The projector is controlled by the remote control whose ID button
is set the same number as this number. When the ALL is selected,
the projector is controlled by a remote control irrespective of the ID
setting.
INFORMATION
Selecting this item displays a dialog titled “SERVICE_INFORMATION”.
It shows the information about the current input.
• This item cannot be selected for no signal and sync out.
FACTORY RESET
Selecting OK using the ► button performs this function. By this
function, all the items in all of menus will collectively return to the
initial setting. Note that the items LASER TIME, LANGUAGE,
STANDBY MODE, and NETWORK settings are not reset.
CANCEL
OK
To Next Page
Loading...
