Product description
0000000141 - 002 - EN 18
Operating fluids
Tab. 3-2 Operating fluids
The gas booster can be used with any operating fluids which do not chemically or
physically corrode the booster materials. The operating fluids should not pose
any danger to the personnel. The gas booster is not appropriate for use with un-
stable, ignitable or oxidising operating fluids. The materials used can be found on
the enclosed general drawing. Certain gas booster designs can be suitable for
other operating fluids. If you are unsure regarding the use of a special fluid,
please don't hesitate to contact Maximator.
Specification Value Unit
Operating temperature
a
a. Depending on the design of the gas booster. Refer to the general drawing provided or
rating plate
°C
Maximum mass concentration 5 (Class 6)
b
b. according to ISO 8573-1
mg/m³
Particle size, max. 10 µm
To Next Page
Loading...
