Removal and disposal
41 0000000141 - 002 - EN
9 Removal and disposal
9.1 Prerequisites for removal and disposal
Follow the manual and general drawing for the product.
In addition, the following conditions must be met:
The product must be in a safe state.
Never use in a potentially explosive atmosphere.
The product must be at ambient temperature.
9.2 Removal
WARNING
Risks of sustaining injuries are posed by improper handling of operating fluids!
Improper handling of operating fluids can lead to accidents resulting in severe in-
juries or death.
► Comply with the safety data sheets of the operating fluids.
► Dispose of operating fluid residues in an appropriate manner.
► Notify other people (for example: repair department) of hazardous operat-
ing fluids.
WARNING
Risk of sustaining injury posed while handling lubricants!
Handling lubricants may lead to accidents resulting in severe or fatal injuries.
► Use protective gloves and goggles.
► Avoid contact with the skin.
► Observe the safety data sheet of the lubricant accordingly.
To remove the gas booster, carry out the following steps:
– Shut down the gas booster.
– Depressurise the gas booster.
– Loosen the fastening screws and connections.
– Disassemble the gas booster.
To Next Page
Loading...