Transport, packaging and storage
0000000141 - 002 - EN 22
Tab. 3-7 Performance values of two-stage gas boosters
3.6.4 Service life
The service life of the product depends on the conditions of use. The service life
should therefore be determined and defined by the operating company.
4 Transport, packaging and storage
4.1 Dimensions and weight
The dimensions and weight of the gas booster are indicated on the general draw-
ing.
4.2 Delivery
Scope of delivery
Tab. 4-1 Scope of delivery
4.3 Packaging
The individual packages are packed according to the conditions expected for
transport. Separate packaging should be used for transport and dust protection.
The packaging is supposed to protect the individual components against trans-
port damage, corrosion and other damage up to its place of use.
Do not remove the dust protection until shortly before installation.
Dispose of the packaging materials in an environmentally friendly manner.
Gas booster max. P
A
Gas booster max. P
A
DLE 2-5 0,8 x pL DLE 2-5-2 1,6 x pL
DLE 5-15 1,6 x pL DLE 5-15-2 3,2 x pL
DLE 5-30 0,5 x pL DLE 5-30-2 1 x pL
DLE 15-30 7,5 x pL DLE 15-30-2 15 x pL
DLE 15-75 2,5 x pL DLE 15-75-2 5 x pL
DLE 30-75 12 x pL DLE 30-75-2 24 x pL
DLE 30-75-3 30 x pL
Designation Quantity
Gas booster 1
Installation and operating manual including Decla-
ration of Incorporation and EU Declaration of Con-
formity
1
General drawing 1
To Next Page
Loading...