Maintenance
33 0000000141 - 002 - EN
7.2.3 Check screw fittings and connecting lines for damages
The following section explains how to inspect the screw fittings and connecting
lines:
7.2.4 Clean gas booster
The following section explains how to clean the gas booster:
Description
Qualifications Operating the system
Type of mainte-
nance
Check
Interval weekly
Prerequisites The gas booster is easy to access.
Tools – Torch
– Cleaning cloth
1. Visual inspection of the screw fittings and connecting lines. Is there any vis-
ible damage or other visible signs of wear?
2. If the inspection does not reveal any abnormalities, it is safe to continue us-
ing the gas booster.
In case of abnormalities, consult with the maintenance staff.
Description
Qualifications Clean gas booster
Type of mainte-
nance
Cleaning
To Next Page
Loading...
